GBoyd

Dremel 8000-03 10.8-Volt Lithium Ion Cordless Rotary Tool

  • Lithium-ion battery holds charge while in storage for two years so light is always ready when you need it
  • Includes 40 genuine Dremel accessories
  • Variable speed from 5,000 to 35,000 rpm to match the proper speed required
  • High capacity 10.8V Lithium-ion battery for longer run times
  • Comfort grip housing for easier handling and better tool control
Remember how cool we all thought that first Dremel was? We're reliving the feeling with this one: lighter, faster, smarter, better, and stronger. The main improvement over the last generation is the battery source: lithium-ion. There are so many reasons to applaud. Lithium holds its charge up to six times longer in storage than nickel-cadmium batteries, so it's ready when you are. Remember the disappointment when you were ready and your battery was low? That won't happen with this one. It's got

List Price: $ 139.10 Price: $ 69.99

Bookmark/FavoritesGoogle GmailWordPressShare


Glass Block Flower Vase

For this purpose a 12″ x 12″ pre-drilled glass block of any color with one edge completely removed, will be required. Use two types of flowers, one of a shade contrasting the one of the glass block, and one similar to the glass block. For instance, if you use a purple glass block, you can use a combination of deep purple tulips and pink roses for your flower arrangement. Use a few stems, not too many, as you do not want an overflowing vase. Make your flower arrangement, with the use of appropriate fillers and foliage. This glass block craft makes a wonderful centerpiece for your dining table. You can use paper or silk flowers if the flowers of your choice are not easily available. This also helps create the exact desired arrangement. For a stronger effect, wrap a contrasting bow around the glass block. Another way of using a glass block as a vase is to drill 3 holes at equal distances from each other, and place single stems of the same flower in each hole. It makes a simple yet delightful craft item.

Glass Block Christmas Decoration

Use a pre-drilled 8″ x 8″ glass block for this purpose. You may also use a solid glass block, and drill a small hole into the center of one of its edges. Push in a string of Christmas lights, so that they are placed in a circular fashion inside the glass block. It needn’t be exactly circular. Leave the plug outside. Use a thick ribbon, in a color of your choice, and wrap a bow around the glass block. When lit, this glass block craft makes one of the best Christmas decorations or Christmas gifts. Further enhance this glass block, by eliminating the bow and sticking a picture of Santa on the surface. When illuminated, it will definitely add to the Christmas spirit.

Glass Block Masterpiece

Create a scene of your choice on the glass block, by using stain glass paints. Clean the block of dust. Use a black, gold or silver outline tube, meant specifically for glass painting surfaces. Fill it in with colors suiting the scene or the painting. Your stained glass painting could be as simple as a single flower in the center of the block, to an entire scene, perhaps of a desert with travelers on camels. You can also cut out figures from craft paper and stick them on the glass block. Furthermore, add some accessories such as a ribbon, or other 3-dimensional objects to give it a more realistic and authentic effect. On the other hand, cut out the figures from chart paper, and trace just the outline on the glass block. Once the outline dries, with a brush, run a shade of color outside the outline to highlight it further. Again, wrap it with a bow that matches the colors of the paints you have used, and your glass block craft is complete. If the glass blocks aren’t clear, and have a pattern on them, highlight this pattern by streaking just the pattern lines with a golden paint (not necessarily glass paint), or any other color of your choice. When placed against light, the highlights stand out and make it an excellent piece of decor.

By: bavarsheiam

About the Author:



http://stainedglassdecoration.blogspot.com/2010/11/christmas-stained-glass.html

Bookmark/FavoritesGoogle GmailWordPressShare

Question by Benny: Swirl marks.?
What are swirl marks? Can you truely get rid of them without a totally new paint? If so how?

Best answer:

Answer by Jaxs
yes go to a detail shop and have the buff them out swirl make come from waxing your car and it grinds into the paint and clear coat so go git buffed by a professional

What do you think? Answer below!

Bookmark/FavoritesGoogle GmailWordPressShare


Drilling a hole in a glass bottle is great craft idea. With a hole in one side of a glass bottle, you can hang glass bottles on the wall, insert items into a seemingly closed bottle and create designs on the side of your bottle in order to make candle holders, lamps or other craft projects. If you have some old glass bottles lying around, you can drill holes in them with a little practice and the right tools. It’s possible, although very difficult, to drill a hole in a glass bottle without a drill or a diamond drill bit. You will need to follow several safety precautions, as working with glass can be dangerous. Follow these steps to learn how to drill a hole in a glass bottle for crafts.

Step 1

Mark the area you would like to drill with a Sharpie. Draw a small dot on the outside of thr glass bottle to show where you are going to drill.

Step 2 Wear safety gear. Before drilling, put on goggles, rubber gloves and a long-sleeved shirt. Even when using a diamond bit, there is a possibility that the glass bottle will break. Even if the bottle doesn’t break, it is likely that shards of glass will fly towards your face. Step 3 Slowly drill a hole in the side of the bottle. You should use a drill or Dremel tool with a diamond bit. Using a diamond bit will prevent the glass bottle from shattering. Drill very slowly to prevent breakage as much as possible. Step 4 Wet the hole while drilling. Every few seconds, use a spray bottle to spray small amounts of water onto the hole. This way the shards of glass will not fly around as easily, and the bottle is less likely to break. The temperature of the drill bit will stay low if you spray water on the bottle frequently. Remove excess glass around the bottle with a damp cloth. Step 5 Polish the drilled hole using silicon carbide sandpaper. If the hole looks particularly rough, rub silicon carbide sandpaper around it to smooth out any rough edges. Go very slowly and carefully. Do not take the goggles or protective gloves off until you have finished sanding the bottle.

Tools:MAKITA 18v Battery, HITACHI Battery.   



By: vincent

About the Author:



Bookmark/FavoritesGoogle GmailWordPressShare
© 2011 Cut and Polish Suffusion theme by Sayontan Sinha